Marker Efficiency Improvement By Using Computer Aided Design (CAD) System As An Implementation Of 4.0 In Garment Industry

Authors

  • Pudjiati
  • Bima Putra Alneva
  • Ruslan Pudjiati A.T., M.Pd, Bima Putra Alneva, Ruslan and Sarah Apriliani
  • Sarah Apriliani

Keywords:

IR 4.0, Pattern, Marker, CAD, Efficiency, AccuMark Gerber Software

Abstract

Technology development are increasing rapidly with the arrival of industrial revolution 4.0. The purpose of the 4.0 industry is to make manufacturing industries and related industries works faster, more efficient, and costumer oriented, on the same time 4.0 industries is able to go beyond automatization, and optimalization. On a garment industry, especially on pattern and marker making process is being done by utilizing computerization, adopting the process of making it manually and being done by computer software CAD (Computer Aided Design). Utilization of CAD can increase the effectivity and the efficiency of marker, therefore this research plan is for the purpose gain a higher marker efficiency. The utilization of AccuMark Gerber will affect the time consumed by pattern making relatively brief and the result can also be automatically be transferred into a pattern making software. This research result is a form of comparison of marker efficiency between marker that made manually and made automatically using Gerber AccuMark. The methodology used is field study on component pattern arrangements on marker. The result shows that the marker efficiency made manually is 84,68%. That points is much higher than the marker that is arranged automatically by system which is 79%.

Downloads

Published

04-04-2023